Medical fluid infusion warmer BFW-1000 is a kind of warming device to warm the liquid to be infusioned into human body by warming the infusion pipe, with high efficiency and easy use.
Dry groove warmer structure: Adopt conventional infusion pipe to warm the infusion pipe directly, no need special consumables.
Apply scope: warm the infusion liquid for medical system.
Triple protection: adopts intellectual microcomputer controlling technology can high precision control temperature. Audible and visual alarm when high/low temperature and no liquid happen to remind the doctor.
Product structure : It is mainly composed of box, cover, internal control circuitry, warming elements, warm transfer plates with groove, and gallus or steeve, steeve clamp component.
l The BFW series is an instrument can heat the infusion/blood by electrical energy, dry warmer.
l It has use the temperature sensor can automatic regulation of fluid temperature.
l Infrared detection function can work continuously for 3 to 6 hours;
l Prompt function: the audible and visual alarm to remind doctor;
l Design Water-proof. The thermostat inside help the infusion stability, without overheating.
l BFW-1000：Highlight LED display;
l Can start to warm within 1 minute after switching on.
l Temperature range: 28℃ - 42℃ ( increasing rate ±0.1℃ ) (82°F-107.6°F, increasing by 0.2°F)
l Temperature error: ±1℃(±2°F)
l Humidity: 35 – 95 %RH ( Non condensing)
l Flow Rate: 1-15ml/min
l Working method: continuous operation
l Battery: 7.2 V/500mAh Ni-MH rechargeable batteries
l Power supply: AC 220V ± 10% 50Hz±1Hz / 110V ± 10% 60Hz±1Hz
l Safety classification: Class I
l Waterproof and dustproof rating: IP64
l Single Unit Dimension: 29cm x 24cm x 23cm Gross Weight: 3.5kg
l 8 pcs/carton Dimension: 54cm x 44cm x 42cm Gross Weight: 20kg
Normative collocation: fasten part, power wire, operation manual, approval certification, warranty card